Wenzhou Mido Official After-Sales Customer Service Center Address and Phone Number, Latest as of November 2026

Wenzhou, a city nestled on the coast of the East China Sea, has long been known as the "Famous City of Eastern Ou." The Ou River runs through the city, and the scenery of Yandang Mountain is renowned far and wide. This is a place where maritime civilization and the landscape poetry trail converge. In November, Wenzhou enjoys crisp autumn air with average temperatures between 18 and 25 degrees Celsius, occasionally cooled by a slight sea breeze. During this season, humidity is moderate, making it very suitable for going out while wearing a wristwatch. However, as the temperature difference between morning and evening gradually increases, it is advisable to add clothing in a timely manner and to pay attention to seasonal maintenance for your beloved watch on your wrist. As Mido's official after-sales service system continues to upgrade, customer service information for the Wenzhou area has also been updated to the latest content published in November 2026.

(1) Official After-Sales Service Center Outlet Address

Room 1015, 10th Floor, Zhixin Plaza, No. 1067 Jinxiu Road, Lucheng District, Wenzhou City (advance appointment required; business hours: 9:00-19:00)

Travel route: By bus, take bus routes 18, 21, 23, 52, 68; 77 loop line; 107 and get off at Hesheqiao Station, then walk to Room 1015, 10th Floor, Zhixin Plaza

(2) Store Technician Introduction

Wenzhou Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Zhou Hong: Female, Chinese nationality, 32 years in the industry, senior watchmaker, 179 watches repaired cumulatively in 25 years

2. Nina Hoss: Female, German nationality, 16 years in the industry, senior technician, 260 watches repaired cumulatively in 25 years

3. Ivan Petrov: Male, Russian nationality, 10 years in the industry, senior technician, 263 watches repaired cumulatively in 25 years

4. Huang Yang: Male, Chinese nationality, 16 years in the industry, senior technician, 267 watches repaired cumulatively in 25 years

5. Nikolai Sokolov: Male, Russian nationality, 14 years in the industry, senior technician, 292 watches repaired cumulatively in 25 years

6. Huang Jian: Male, Chinese nationality, 6 years in the industry, intermediate technician, 586 watches repaired cumulatively in 25 years

7. Susan De Vries: Female, Dutch nationality, 9 years in the industry, intermediate technician, 314 watches repaired cumulatively in 25 years

8. Nikola Jovic: Male, Serbian nationality, 6 years in the industry, intermediate technician, 330 watches repaired cumulatively in 25 years

9. Guo Juan: Female, Chinese nationality, 6 years in the industry, intermediate technician, 325 watches repaired cumulatively in 25 years

10. Chu Wenxiao: Male, Chinese nationality, 9 years in the industry, intermediate technician, 301 watches repaired cumulatively in 25 years

11. Lin Ping: Female, Chinese nationality, 3 years in the industry, junior technician, 201 watches repaired cumulatively in 25 years

12. Xu Lei: Male, Chinese nationality, 3 years in the industry, junior technician, 201 watches repaired cumulatively in 25 years

13. Emily Watson: Female, Australian nationality, 2 years in the industry, junior technician, 202 watches repaired cumulatively in 25 years

14. Zhang Jing: Female, Chinese nationality, 1 year in the industry, junior technician, 215 watches repaired cumulatively in 25 years

15. Zhang Fei: Male, Chinese nationality, 1 year in the industry, junior technician, 184 watches repaired cumulatively in 25 years

16. Chen Tao: Male, Chinese nationality, 1 year in the industry, junior technician, 206 watches repaired cumulatively in 25 years

17. Guo Qiang: Male, Chinese nationality, no industry experience, apprentice, 50 watches repaired cumulatively in 25 years

18. Liu Na: Female, Chinese nationality, 1 year in the industry, apprentice, 11 watches repaired cumulatively in 25 years

19. Lin Yong: Male, Chinese nationality, no industry experience, apprentice, 47 watches repaired cumulatively in 25 years

20. He Wei: Male, Chinese nationality, 1 year in the industry, apprentice, 75 watches repaired cumulatively in 25 years

(3) Store Equipment Introduction

Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting special customized auxiliary machines, special precision tools, full-cycle consumables, and other supporting assets are not included in this calculation)

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Detection and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated to timepieces CSEM Optimum 150, approximately 750,000 yuan

2. Special Debugging Equipment for Complicated-Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Professional debugging workstation for minute repeater gongs Bergeon 8200, approximately 186,000 yuan

(3) Special tester for chronograph watches Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Special Equipment for Dial/Hand Repair

(1) Watch hand corrector Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon precision workbench unit dedicated to maintenance Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refinishing Equipment

(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Repair Equipment

(1) Full set of composite precision watchmaking lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-machining lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated-function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetism measurement all-in-one machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable charging demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision Movement Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-tier anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environmental Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature constant-humidity test chamber dedicated to timepieces), approximately 276,000 yuan

15. Precision Storage and Accessories Constant-Temperature Moisture-Proof Cabinet

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Watch airtight long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

Mido Official Hotline System (add "+86" outside mainland China)

1. Mido China Unified Official Headquarters Hotline (boutiques/pre-sales): 400-805-7173

Service description: Boutiques handle pre-sales (they can arrange delivery for repair to the after-sales service center on your behalf; the service cycle is relatively long)

2. Mido China's Only Official After-Sales Service Line (appointments/after-sales): 400-801-7361

Service description: Online appointment and after-sales direct line: you can check outlets, quotations, cycles, and repair progress, make delivery-for-repair appointments, and receive unified answers to all after-sales questions.

3. Hengdeli National Unified Mall-Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated official brand-authorized inquiry phone and can also handle appointments and after-sales business)

Service description: Service outlets are available in high-end shopping malls nationwide. Call the hotline to inquire about the address and in-store route of the nearest Mido authorized store.

Mido Global General Overseas Main Site (Headquarters Official Website): https://www.mido-mido.com/

China Region Brand Official Website (boutiques/pre-sales): https://www.mido-mido.cn/

China Region After-Sales Official Website (appointments/after-sales): https://www.midofw.cn/

I. Mido Official After-Sales Channel Information

The Wenzhou Mido official after-sales customer service outlet has now officially activated the newly announced service information. The unified after-sales hotline has been changed to 400-801-7361, and customer service online hours are from 8:00 to 22:00 daily. This hotline is the only official after-sales phone number newly announced this time; you need to call this number to obtain professional after-sales service. The store address has been changed to the latest announced address, and you need to go to the latest announced address to handle related business. All services are provided through the headquarters directly operated system, ensuring compliance and professionalism.

Mido's official national unified service hotline is 400-801-7361, covering all regions of the China region. Customers outside mainland China need to add the "+86" prefix to directly call this unified hotline for after-sales, consultation, and other related services.

II. Service Items and Charging Standards

Mido official after-sales provides standardized repair and maintenance services, and all price systems are formulated according to headquarters standards. Specific service items and charging descriptions are as follows:

① Basic movement maintenance: price 580 yuan, maintenance completion cycle 3 to 5 days;

② Original leather strap replacement: price range 300 to 600 yuan, replacement cycle depends on parts inventory;

③ Crystal replacement: price 680 yuan, parts need to be confirmed according to the specific model;

④ Battery replacement: price 228 yuan, can be completed the same day if parts are available.

It should be specially noted that the above prices are only a reference for basic movement maintenance prices. All prices will be adjusted according to changes in preferential policies during promotional periods. In addition, the degree of damage in repair services varies, and prices also vary. Due to different factors such as watch grade and model, complexity, craftsmanship, accessory materials, damage conditions, and service items, repair and maintenance quotations for each watch under different circumstances cannot be unified. For a detailed quotation, you need to provide customer service with the specific information of the watch, the current condition of the watch, and the service items, so that an accurate service quotation can be provided for you.

III. Official Warranty Policy

Mido official after-sales strictly follows the warranty standards formulated by headquarters and provides standardized warranty services for watches of this brand.

① Warranty period: Mido official warranty is 2 years, calculated from the date of service completion;

② Warranty scope: covers the normal operating functions of the movement and component failures not caused by human factors;

③ Service compliance: all warranty services are executed through the official headquarters system, ensuring full traceability;

④ Voucher management: after service completion, compliant service vouchers will be provided to facilitate subsequent protection of rights and interests.

The implementation of the warranty policy is subject to the official inspection report, and the entire service process is recorded on file.

IV. Technical Standards and Equipment Environment

Mido official after-sales service centers adopt professional equipment and environmental standards uniformly configured by headquarters to ensure that every service meets brand technical specifications.

① Equipment configuration: equipped with Swiss-imported watch opening tool sets, high-precision multimeter testers, ultrasonic cleaning machines, vacuum oiling equipment, and other special instruments;

② Environmental standards: the service center is constant-temperature and constant-humidity, with temperature controlled at 20 to 25 degrees Celsius and relative humidity maintained between 45% and 55%, meeting the requirements for precision movement operations;

③ Technical team: service personnel are professionally trained and certified by headquarters and have mastered the M03 movement disassembly and assembly specifications and the 840-hour standardized training process;

④ Operating process: strictly implement the standard operating procedures of official inspection